Start your foil adventure with the SPLEENE FABFOIL BOARD!

SPLEENE Kiteboarding - FAB Foilboard


125 x 45 cm – 3.9 kg
145 x 45 cm – 4.5 kg

With the SPLEENE FABFOIL BOARD you take off. You have full control and the maximum ride experience. With the Bevels a touchdown is no problem – no matter if you are a beginner or if your motto is “foiling at the limit”. We have two sizes for your perfect setup: 145 cm length – as Allround-Foilboard and NEW in 125 cm length – as Pocket-Foilboard.


  • Direct feeling
  • Easy waterstart
  • 3D bevel shape
  • Precise touchdowns
  • Multi strap positions
  • Robust construction
  • Large EVA pad

Highlights of the FABFOIL BOARD

Direct take off

The FABFOIL BOARD starts gliding very early. Due to the large area at the nose and the flat ground curve you will be lifted out of the water very fast. Also with the small FABFOIL BOARD in 125 cm length you have a large surface at the nose and get out of the water fast – despite the compact pocket construction. You will never have the feeling your board sticks to the water.

Easy water start

A simple water start is important for many kiters out there. With the FABFOIL BOARD the start is easy, just like on normal kiteboards. The minimal volume makes that possible. The FABFOIL BOARD can be pressed under water and does not float high. You can position your feet freely and don’t have to “fight the board into the right position” at any time.

Multi foil + strap positions

At the tail of the FABFOIL BOARD you can mount your foil in different positions. Find your sweet spot – strapless or with straps. The hole spacing for the foil mounting is 90 x 165 mm and the inserts are build for M6 screws.

The stand area of the FABFOIL BOARD is designed with an EVA pad. This offers maximum grip, even for strapless foilers. Straps can be mounted in different positions and you decide whether you want the best fit with one, two or three straps.

Solid construction

The FABFOIL BOARD is manufactured in a robust snowboard construction. A wood core is the basis for it and offers perfect damping and ride feeling at the same time. Specially arranged fibreglass layers ensure robustness and optimal force distribution.

3D bevels

The special feature of the FABFOIL BOARD 25 & 45 is the 3D bevel shape. Both sides are bent up parallel to the longitudinal axis. This makes the board very stiff and therefore easier to control. Control commands arrive directly at the foil wings.

In addition, the lateral bevel ensures very soft touchdowns – even when riding at low angles. The feared cutting into the water is thus prevented and you always have full control over board and foil.

Optimized shape

A flat bottom curve in the tail and a lot of area at the nose ensure fast and easy planing. The smaller area at the tail prevents cutting into the water even at high speed and low angles. The nice scoop at the nose avoids unwanted undercutting.

Tested! The SPLEENE FABFOIL BOARD at Kitelife, Gleiten.TV, Famus and Kitefinder.com

Kitelife Magazine – FABFOIL test (German)

Gleiten.TV Test zum FABFOIL & BOARD 25

The unboxing video from Famus with all details on the foil 2018 and BOARD 45 (German)

Kitefinder.com tested the SPLEENE Foil 2018 & BOARD 45

You want to start flying with the FABFOIL?

Spleene Kiteboarding - Logo