One Kiteboard for every condition?

With the High Tech Session 45 you get best freeride performance mixed with a huge windrange.

Spleene Kiteboarding - High Tech Session 45

High Tech Session 45

145 x 46 cm

The Session 45 is the perfect freeride kiteboard. It covers a large windrange with maximum kitesurf fun. Whether gentle breeze or allot power in your kite – with the Session 45 you always have the right kiteboard on your feet. The new, thinner edges make it lighter – you’ll notice that immediately when you speed up, carve or jump.


  • Freeride feeling
  • Large windrange
  • Early planing
  • Easy upwind riding
  • Agile movement
  • Very good control & grip

Range of use of the Spleene Session 45

Spleene Kiteboarding - High Tech Session - Style and Characteristics

Highlights of the Spleene Session in Detail

What's new

The new High Tech Session 45 comes with a thinner edge. This makes the kiteboard lighter – you will notice it immediately when accelerating and jumping.

The Spider Frame 3D Deck brings you more flex and comfort. Also new: for the first time in development we equipped the High Tech Line with the Shark Skin Surface. The technology for more speed has been adapted from our Carbon Pro Line.

Our UV-safe graphics will make sure that you enjoy the colors on your board for a long time.


Large windrange

Session 45 has a very large wind range. The focus is on lower and middle wind conditions to get you early into planing and to go easily to wind holes. Also in stronger wind conditions you have everything under control with the Spleene High Tech Session – even if heavy gusts push into your kite.

Easy upwind riding

With its outline, the Session 45 has a fantastic upwind performance. You can easily direct the kiteboard towards the wind. The sharp edges support stress-free upwind riding. The upwind performance lies between a Door and the RIP.

Best comfort

Comfort is one of the most important features of all Spleene High Tech Kiteboards. Thanks to its flex and Advanced Jet Bottom, shocks are absorbed and allow you to even kite and have fun in choppy water. Guaranteed without splash water – this is ensured by the tucked-under-edge shape of the edge! With the High Tech Session 45 you can have fun all day long while keeping course and speed easily up.

Easy jumping

With the wide outline at the tips the Session 45 can edge deep into the water. You build up a lot of energy that you can unleash precisely. For jumps, the Session 45 takes off easily from the water and boosts you up. The Advanced Jet Bottom at the bottom makes your landing very smooth.

Beginner and heavy-rider friendly

Are you a beginner or just starting to progress? With its size, comfort and good upwind performance, the Session 45 is the perfect kiteboard for a steep learning curve. Even as a “clydesdale” rider (> 100kg) the Session 45 is your match. It is the perfect allround freerider.

What our customers say about the Spleene High Tech Sessions

“I got the Session 45 in addition to my smal l kiteboard and I have a lot of fun with it. It planes very early and I can ride it in strong wind.” (Translated from German)


★ ★ ★ ★ ★


Hein L.

“Great board. I could go through every windhole last weekend, even when the wind was not very good. And thanks for the great service.” (Session 45 2017 | translated from German)


★ ★ ★ ★ ★


Lasse H.
from Bremen

What´s the technology behind the Spleene High Tech Session?

Since birth of Spleene Kiteboarding in 2002, allot happened. Our total know-how is united in this 8th generation of our High Tech Line:

Advanced Jet Bottom

The bottom shape is characterized by a channel with a double concave. As a result, the kiteboard slides early. Instead of a simple radius, a parabolic shape is used in the Spleene Advanced Jet Bottom. Compared to a conventional double concave, the Advanced Jet Bottom allows significantly more edge grip and pushes the water along the edges. In choppy conditions, the effect is very clear. In addition, the water surface is broken up when the kiteboard hits it, thus allowing a smooth landing after jumps.

Shark Skin Surface

The bottom of the kiteboard is matt finished by using a special technique. This gives the kiteboard a shark skin effect with reduced friction. The result is higher speed and faster acceleration.


All Spleene Kiteboarding High Tech Line Kiteboards are produced with a glued, CNC milled wood core.

Spleene Kiteboarding - Woodcore

Beveled Rail

The slight elevation on the side of the kiteboard increases comfort enormously. This makes kitesurfing a lot easier without cutting or splashing water – especially in harsh conditions.

Spleene Kiteboarding - Beveled Rail

Spider Frame 3D Deck

The upper deck of the Spleene Kiteboard is equipped with the new Spider Frame 3D structure. In the area of ​​the grab handle, the kiteboard becomes more flexible and gets noticeably more comfortable. The kiteboard is faster to drive, even in rough choppy water.

UV-safe graphics

The glossy finish of the kiteboard is provided with an UV-protection. Even many hours in the blazing sun will not harm your kiteboard and the colors will keep shining like the first day.

Straps, Pads and Finns

The Spleene Kiteboards are supplied with Spleene Straps, Pads and Finns. The pads are anatomically adapted to the foot and provide a toe edge for extra grip. The straps allow different mounting positions and can be individually adjusted via velcro fasteners. The Spleene Kiteboarding Finns are made of extra hard G10 material.

Spleene Kiteboarding - Straps and Pads

Spleene Kiteboarding - Fins

Can´t wait to ride your new Spleene Session?

Only 529.- EUR

Spleene Kiteboarding - Logo