The Carbon Pro Line heralds a new era of lightwind kiteboarding
Carbon Pro Session 45
High Performance Freeride Kiteboard
Handcrafted in Germany
145 x 45 cm
The Carbon Pro Session 45 is the allrounder of the Carbon Pro line-up. It combines its enormous wind range with the perfect agility of a 1950g high end carbon kiteboard.
The Carbon Pro Session 54 is the best carbon kiteboard for every rider, who seeks for maximum freeride and freestyle performance in medium wind conditions.
– minimum weight
– maximum agility
– enormous carbon power
– precise board control
Superior at all points – the Carbon Pro Line koards beat everything that is possible with regular kiteboard construction materials. By the exclusive usage of a multi-layered carbon lattice, the Carbon Pro Boards enter a new weight and performance dimension.
With its 1950g, the Carbon Pro Session 45 offers a papable increased agility over the Session 45 of the High Tech Line. Inertia is massively reduced and the responsiveness of the Carbon Pro Session 45 can be felt on the first meters. The acceleration and the maximum speed is enormous. The Advanced Jet Bottom gives the kiteboard also a great planing performance and even in strong wind conditions controlling the kiteboard is easy.
For Freestyle, the superior preferences of the Carbon Pro Line show their full power. With the multi-layer Carbon lattice of the Session 45, it can be edged hard with minimal input power and it loads up energy very fast. The loaded energy is guided maximally into the pop with a very high precision and while being airborne the Session 45 can hardly be felt at the feet. On landing, the Advanced Jet Bottom absorbs the impact very well and guidance is directly established.
The Carbon Pro Session 45 is a high performance freerider and plays, with all other Carbon Pro Line boards, in a league of their own. Once taken for a ride and a switch back won’t be easy.
Overview on main characteristics
Minimum weightThe Carbon Pro Session 45 is, like all kiteboards of the Carbon Pro Line, produced with a multi-layered carbon lattice. Non woven carbon fibres spread forces perfectly and build up less high, allowing minimal usage of epoxy resin. The resulting weight of only 1950g is extremely noticeable at all time. Carbon Pro boards are highly responsive, agile and an indescribable feeling while being airborne.
Carbon powerThe energy load and recovery speed of the multi-layered carbon lattice can’t be achieved with regular kiteboard materials or often used layers of “design carbon”. The Carbon Pro Session 54 has an enormous amount of power, mixed with very precise force control. Especially for take-off, the superior preferences of the high-end carbon show their full strength and release an astonishing pop.
Handcrafted in GermanyEvery Carbon Pro Board is individually crafted. Highest precision and experience ensure the extreme performance and weight preferences of the carbon kiteboards.
Huge wind rangeThe Carbon Pro Session 54 is build for maximum wind range. Its main strength lies in light wind, to combine maximum agility with very good planing performance. But also in medium to strong wind conditions, or heavy gusts, the Session 54 offers a very high level of control and can be kept riding.
Great agilityThe Session 54 is the allround kiteboard of the Carbon Pro Line. The outline, mixed with the low weight give a very high agility, inviting to new freestyle tricks at all time. The curved tip outline creates a very good grip in turns and allows maximum edging. The Jet-Bottom shape in the bottom of the carbon kiteboard guarantees a smooth landing and together with a low weight, guidance is established right after touchdown.
Massive planing and upwind performanceThe perfect balance of surface usage, the low weight and the Jet-Bottom Shape of the bottom of the Carbon Pro Session 45 give it fantastic planing performance. The carbon kiteboard accelerates very early and very fast and reaches a great top speed. Additionally the upwind performance is only beaten by the Doors with their concave outline.
High comfort and no sprayThe combination of carbon flex, Advanced Jet Bottom and low weight create a very good comfort. Even in very choppy water, the Carbon Pro Session 45 will run smoothly. And the optimized outline will definitely prevent any spray water.
Beginner friendlyIts size, low weight and high comfort make the Carbon Pro Session 45 from the first meters on to a perfect kiteboard. A steep learning curve is guaranteed and with an increasing level, more and more of the high performance potential can be unleashed.
Action area of a Carbon Pro Session 54
- Freeride 100%
- Lightwind 95%
- Race 95%
- Freestyle 100%
X³ Carbon Construction
X³ Carbon ConstructionWithin the Carbon Pro Line, a specially for Spleene developed multi-layered carbon lattice is used. The carbon fibres are not woven with each other, optimising force flow and allowing minimal usage of epoxy resin.
All carbon kiteboards are handcrafted in Germany, to guarantee maximum precision during the production process.
Advanced Jet BottomThis Shape-Detail describes a double concave channel on the base side of the kiteboard. It allows the kiteboard to plane more freely and earlier. The profile of the double concave is not a simple radius. The Spleene developed Advanced Jet Bottom has a parabolic shape. Compared to a normal double concave the Advanced Jet Bottom provides significantly more “edge bite” as it channels the waterflow along its edges. Especially in choppy conditions the difference is very noticeable. When landing the water surface will be broken up by the bottom of the kiteboard and allows a smooth landing.
V-DeckThe top side of the Carbon Pro Session 45 as a slight V-shape. With this little indent, the wood-core gets thinner and the board becomes lighter. Additionallythe V-Deck on the kiteboard allows to precisely adjust the flex and give the kiteboard a playfull character, as well as giving excellent grip in carved turns.
Wood-CoreAll Spleene Carbon Pro Line boards are produced with a form-glued, CNC-milled wood core.
The wood core has added PU rails, as well as reinforced fin- and insert positions.
Gear IDGear ID verbindet deine Ausrüstung über einen NFC-Tag/QR-Code-Tag mit dem gear-id.com Portal. So wird es leicht identifizierbar, sollte es verloren gehen oder gestohlen werden. Du kannst deine Sessions, Orte und Erinnerungen mit deinem Material in deinem Gear-ID Account verbinden und mit Freunden und anderen Kitesurfern teilen.
Choose the right size
Overview on all Spleene Kiteboards