The Carbon Pro Line heralds a new era of lightwind kiteboarding
Carbon Pro Door 59
High performance lightwind freeride door
Handcrafted in Germany
159 x 45 cm
The Carbon Pro Door 59 offers the classic door-shape, with its outstanding lightwind and upwind performance, and combines it with a high-end carbon construction. The result is a totally new level of agility, board control and ride feeling.
The Carbon Pro Door 59 is the best board for every rider, who seeks more performance and freedom on a lightwind door.
– minimum weight
– high agility
– enormous carbon power
– outstanding lightwind and upwind performance
– precise board control
Superior at all points – the Carbon Pro Line boards beat everything that is possible with regular kiteboard construction materials. By the exclusive usage of a multi-layered carbon lattice, the Carbon Pro boards enter a new weight and performance dimension.
While freeriding, the low weight of 2180g on a Carbon Pro Door 59 can be felt every second. The board is remarkable light on the feet and feels like a much smaller board. The acceleration is fantastic and the top speed is very high. Switching the board is dead easy and the rider always has a very high level of board control. Also increasing wind conditions and heavy gusts are no problem at all for the Carbon Pro Door 59.
Next to its extreme low weight, which makes it very easy for the board to take off the water, the high-end carbon lattice produces a fabulous freestyle performance. The enormous energy loading and releasing power of the high-end carbon thrills every second. With maximum load and precision, energy is guided into the pop and a new world of lightwind freestyle opens up.
For landing, as well as chop water, the carbon lattice also absorbs energy very well and allows a smooth ride with a high comfort. While the bottom of the board constantly keeps up the good guidance.
The Carbon Pro Door 59 is a high performance lightwind board and plays, with all other Carbon Pro Line boards, in a league of their own. Once taken for a ride and a switch back won’t be easy…
In comparison with the Carbon Pro Monster Door, the Carbon Pro Door 59 is recommended for all riders up to 85kg or everyone who likes to keep riding the door also in stronger conditions.
Overview on main characteristics
The Carbon Pro Door 59 is, like all boards of the Carbon Pro Line, produced with a multi-layered carbon lattice. Non woven carbon fibres spread forces perfectly and build up less high, allowing minimal usage of epoxy resin. The resulting weight of only 2180g is extremely noticeable at all time. Carbon Pro boards are highly responsive, agile and an indescribable feeling while being airborne.
The energy load and recovery speed of the multi-layered carbon lattice can’t be achieved with regular kiteboard materials or often used layers of “design carbon”. The Carbon Pro Door 59 has an enormous amount of power, mixed with very precise force control. Especially for take-off, the superior preferences of the high-end carbon show their full strength and release an astonishing pop.
Handcrafted in Germany
Every Carbon Pro Board is individually crafted. Highest precision and experience ensure the extreme performance and weight preferences of the boards.
Despite the door shape of the Carbon Pro Door 59, the board can not be compared to a regular board of the same size. The low weight and the optimized outline deliver an unbelievable riding experience – no matter if going for carved turns, hard edging or tricks in the air.
Maximum lightwind performance and large wind range
The proved outline, large surface and low weight offer maximum lightwind performance. The flat scoop-line gets the board planing very early and simply slides through wind lulls. The specially grinded base of Carbon Pro Boards imitates a shark-skin, which reduces water drag and increases planing performance. And thanks to the high level of control and the very easy handling, the board can be kept riding in medium wind conditions.
Unbeaten upwind performance
The concave outline and the low scoop-line are the secret of the fantastic upwind performance. The board will point windward by itself and with minimal effort the Carbon Pro Door 59 will eat its way towards the wind.
High comfort and no spray
The combination of carbon flex, shape and low weight create a very good comfort. Even in very choppy water, the Carbon Pro Door 59 will run smoothly. And the optimized outline will definitely prevent any spray water.
The door shape, the low weight and the comfort sum up to a perfect board for quick learning process. With a small kite or at low wind conditions, the Carbon Pro Door 59 will let you jump up the experience ladder. And with an increasing level, more and more of the high performance potential can be unleashed.
Action area of a Carbon Pro Door 59
- Freeride 100%
- Lightwind 100%
- Race 95%
- Freestyle 85%
High End Carbon Construction
X³ Carbon Construction
Within the Carbon Pro Line, a specially for Spleene developed multi-layered carbon lattice is used. The carbon fibres are not woven with each other, optimising force flow and allowing minimal usage of epoxy resin.
All boards are handcrafted in Germany, to guarantee maximum precision during the production process.
Grinded base side
The bottom sides of the Carbon Pro Boards have a special, manual grind, creating a shark-skin surface. This reduces water drag, resulting in faster acceleration and increased top speed.
The bottom of the Carbon Pro Boards has a single concave shape. After many tests of different bottom shapes, the single concave proved as most effective on ultra-light carbon constructions. The concave is deeper in the centre of the board and flats a bit out towards the tips, resulting in better turning performance.
The concave outline is responsible for the extreme upwind performance of the Carbon Pro Doors. The waterway is longer and it creates less drift. Additionally the flex of the board forms a geometry, which keeps the Carbon Pro Doors constantly upwind.
All Spleene Carbon Pro Line boards are produced with a form-glued, CNC-milled wood core.
The wood core has added PU rails, as well as reinforced fin- and insert positions.
The perfect day
What our customers say
I had nearly all Doors since 2008 and I had also the new Door, but the new Carbon Pro Line Monster Door is exceeding my expectations by far. Such a super light board gives a feeling like riding a very small board. Fantastic and thanks to Spleene for this great board.Kai
I had the chance to test a prototype in last summer and it felt so great to ride this board. It is incredible how light this board is and it rides smoother than anything else I have ridden before. The biggest fun is jumping!Kalle
Test result of the Carbon Pro Monster Door – German Kitelife Magazine (German only)
Choose the right size
Overview on all Spleene Kiteboards